Filter
Top Products
P 14/ 15
Fig. D-6
Wiring diagram
Wiring of LED Lead Wire (before setting Switch)
BTW074, BTW104
(equipped with Automatic Impact Stop System)
Rib F
LED
Boss
Rib A
Rib B
Rib D
Rib C
Connector box
Wiring of Lead wire of LED Warning Lamp (before setting Switch)
Rib F
LED
Boss
Rib A
Rib B
Rib D
Rib C
Connector
(4 pin)
Route Lead wires (blue, red and gray)
of LED Warning lamp and the
connecting Lead wire (black) between
Rib C and Rib D.
LED warning lamp
Route Lead wires (black, red) between
Rib A and the inner wall of Housing set (L).
Route lead wires (black, red) between
Rib A and Rib B so that they are not pinched
with Switch.
Route the bundle of Lead wires (blue,
black, red and gray) between Rib A
and the inner wall of Housing set (L).
Route the bundle of Lead wires (blue,
black, red and gray) between Rib B
and the inner wall of Housing set (L).
Route Lead wires (black, red) between Rib B
and the inner wall of Housing set (L).
Route Lead wires (black, red) between
the following Ribs.
* Rib of the Boss for Screw hole
* Rib of the Connector box
Connector (6 pin) for
connecting to Switch
Connector (4 pin) for
connecting to
LED Warning Light
Secure Lead wires of both Connectors
(4 pin) with Lead wire holders.
Connector 6 pin for
connecting to Switch