Filter
Top Products
13
While pushing the guide bar against the tool, slide the bar
towards the sprocket till it stops. And then tighten the bolt
firmly.
OPERATION
CAUTION:
• Keep all parts of the body away from the saw chain when
the motor is running.
• Hold the saw firmly with both hands when the motor is
running.
• Do not overreach. Keep proper footing and balance at all
times.
• Do not fail to secure workpiece so that it will not move
suddenly during operation. Also be very careful with cut-
off pieces. They may hit and injure operator.
• Do not cut anything except PVC pipes. It may damage
saw chain to cut steel, aluminum, wood, etc.
NOTE:
• Berfore and after use of the tool, put oil to both the saw
chain and the guide bar and let the tool idle for a while
for lubrication.
• If it begins to run on the guide bar in an awkward
manner, supply oil to the saw chain for its original
smooth movement.
Switch on the tool. Do not start cutting till the saw chain runs
at top speed. To cut the workpiece, first, bring the bumper on
the front of the tool in contact with the workpiece; by bringing
the bumper in contact with the workpiece, the tool is stabi-
lized till a cut is fininished. And then keeping the bumper in
the position, move the guide bar right down through the
workpiece.
NOTE:
• No lubrication is necessary during operation.
• Do not force the tool during operation.
002281
1. Bumper
1
002282