Filter
Top Products
14
• Do not continue operation any longer when the first
battery gets empty because continuous operation using
more than a battery will result in a burnt motor.
• Be sure to keep the bumper in contact with the
workpiece till a cut is finished. If not, the tool will be
naturally pulled in the direction of the arrow, causing the
top of the guide bar to wobble.
• Do not cut the workpiece from the bottom. The deeper
the workpiece is cut in, the more strongly the guide bar
sticks in the workpiece because of the increasing
pressure of the piece which is going to be cut off. And
finally the guide bar becomes not removable from the
workpiece.
Carrying tool
Always remove the battery cartridge from the tool and cover
the guide bar with the scabbard before carrying the tool. Also
cover the battery cartridge with the battery cover.
1. Bumper
1. Piece to be cut off 2. The guide bar sticks in the work-
piece
1
002283
1
2
002284
1. Battery cover
2. Scabbard
1
2
002285