Filter
Top Products
ADDITIONAL SAFETY RULES
FOR CHARGER
&
BATTERY CARTRIDGE
1.
Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF)
or ABOVE 4OoC (104OF).
2.
Do not attempt to use a step-up transformer, an engine generator or DC
3.
Do not allow anything to cover or clog the charger vents.
4.
Do
not short the battery cartridge. A battery short can cause a large current
flow, overheating, possible burns and even a breakdown.
5. Do not store the tool and Battery Cartridge in locations where the tempera-
ture may reach or exceed 5OoC (122OF).
6.
Do not incinerate the Battery Cartridge even
if
it
is severely damaged or is
completely worn out. The battery cartridge can explode in
a
fire.
power receptacle.
ADDITIONAL SAFETY RULES
FOR CORDLESS ANGLE DRILL
1.
Be aware that this tool is always
in
an operating condition, because
it
does
2. Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5. When drilling into walls, floors or wherever "live" electrical wires may be en-
countered,
DO
NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the plastic handle or plastic tool body to prevent electric
shock
if
you drill into a "live" wire.
not have to be plugged into an electrical outlet.
Be sure no one
is
below when using the tool in high locations.
6.
Do not leave the tool running. Operate the tool only when hand-held.
7.
Do not touch the drill bit or the workpiece immediately after operation, they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5