Filter
Top Products
Installing and removing bit
CAUTION
:
Be
sure that the battery cartridge has been removed from the tool.
.To install the drill bit, place
it
in the
chuck
as
far
as
it
will go. Tighten the
chuck collar by hand.
Place
the chuck
key in each of three holes, and tighten
clockwise.
To remove the drill bit, place the chuck
key into the chuck hole and turn counter-
clockwise.
Tighten
CAUTION:
Always
set
the Forward-Reverse switch lever to NEUTRAL when installing, removing or
adjusting bits or accessories.
L
Chuck
key
7