Makita DA3000D Cordless Drill User Manual


 
0
Use
tate
Item
Screwdriving
cutting lubricant on the bit
to
facili-
!
drilling if necessary.
Nominal Diameter
(mm)
Bit
No.
Phillips bits
Wood
Screw
2.1
-
2.7
(3/32"
-
1/8")
3.1
-
4.5
(1/8"
-
3/16")
Select
your screws and nominal dia-
meter with the chart on the right.
Slotted bits
Select
a
slotted bit to match the slot on the screw heads. If the bit
is
too small for the
screw slot, the bit and/or screw head may be damaged.
Overload protector
0
The overload protector automatically
cuts in to break the circuit and the
button pops out, whenever heavy work
is
prolonged.
Wait
20-30
seconds before
pressing the restart button to resume
operation. Your finger should not be on
the trigger when you press the restart
button, however.
Restart button
I
9