Filter
Top Products
SPECIFICATIONS
Model HR1820 HR2510
Capacities
Wood .................................................................................................................. 15 mm 30 mm
Steel ................................................................................................................... 10 mm 13 mm
Concrete ............................................................................................................. 18 mm 25 mm
No load speed (min
–1
) ........................................................................................... 0 – 1,000 0 – 800
Blows per minute ................................................................................................... 0 – 3,500 0 – 3,000
Overall length ........................................................................................................ 321 mm 330 mm
Net weight ............................................................................................................. 3.1 kg 4.2 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets without earth wire.
For European countries only
Noise and Vibration of Model HR2510
The typical A-weighted noise levels are
sound pressure level: 90 dB (A)
sound power level: 103 dB (A)
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 8 m/s
2
.
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized by
Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi, 446-8502 Japan declares that this product
(Serial No. : series production)
manufactured by Makita Corporation in Japan is in
compliance with the following standards or standard-
ized documents,
HD400, EN50144, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
Yasuhiko Kanzaki
CE 94
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
2