Filter
Top Products
Repair
P 10 / 22
< 9 > Disassembling armature
Fig. 40
Fig. 41
Fig. 42
Fig. 43
1. Remove handle cover by unscrewing 3 pcs. of tapping screw 4 x 45. And remove carbon brushes
as illustrated in Fig. 40.
2. Separate gear housing together with armature, from motor housing by unscrewing 4 pcs. of tapping screw 4 x 45
as illustrated in Fig. 41.
3. Slightly hitting the edge of gear housing with plastic hammer, remove armature from inner housing assembled in
gear housing. See Fig. 42.
4. Ball bearings of fan side and commutator side can be removed with No.1R269 "Bearing extractor (small)".
See Fig. 43.
Carbon brush
Carbon brush
Handle
cover
Tapping screw
4 x 25 : 3 pcs.
Tapping s
crew 4 x 45 : 4 pcs.
Brush
holder
Brush holder
Gear housing
Motor housing
Gear housing
Inner housing
Plastic hammer
No.1R269
"Bearing extractor (small)"
Ball bearing
Armature
Inner housing
Plastic hammer