Makita LS1013F Saw User Manual


 
12
Lighting up the lamps
CAUTION:
This is not a rainproof light. Do not wash the light in
water or use it in a rain or a wet area. Such a conduct
can cause an electric shock and fume.
Do not touch the lens of the light, as it is very hot while it
is lighted or shortly after it is turned off. This may cause
a burn to a human body.
Do not apply impact to the light, which may cause
damage or shorted service time to it.
Do not keep casting the beam of the light to your eyes.
This can cause your eyes to be hurt.
Do not cover the light with clothes, carton, cardboard or
similar objects while it is lighted, which can cause a fire
or an ignition.
Push the upper position of the switch for turning on the light
and the lower position for off.
Move the light to shift an area of lighting.
NOTE:
Use a dry cloth to wipe the dirt off the lens of lamp. Be
careful not to scratch the lens of light, or it may lower the
illumination.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Socket wrench storage
The socket wrench is stored as shown in the figure. When
using the socket wrench, pull it out of the wrench holder.
After using the socket wrench, return it to the wrench holder.
1. Light
2. Light switch
1
2
002026
002027
1. Socket wrench
2. Wrench holder
1
2
001530