MasterCraft AIR-POWERED BRAD NAILERS Nail Gun User Manual

Table Of Contents
General Safety . . . . . . . . . 1 – 2
Specifications . . . . . . . . . . . . . 2
Operating The Nailer . . . . . . 2
Troubleshooting . . . . . . . . . . 5
Warranty . . . . . . . . . . . . . . . . 6
Air-powered brad nailers are designed
for decorative trims, moldings, win-
dow casings, furniture trim and picture
frame assembly. Features include: con-
venient side loading magazine which
holds up to 100 nails, a sequential trip
safety mechanism and a narrow nose
for accurate fastener placement in
tight applications.
General Safety Information
This manual contains safety, opera-
tional and maintenance
Read this manual and
understand all safety warn-
ings and instructions before
operating the nailer.
Before operating the nailer, read and
understand all safety warnings and
labels. Follow the operating instruc-
tions outlined in this manual.
Danger indicates
an imminently haz-
ardous situation which, if not avoided,
WILL result in death or serious injury.
Do not use any type of flammable
gases or oxygen as a
power source for the
nailer. Use filtered,
lubricated, regulated
compressed air only.
Use of a compressed
gas instead of com-
pressed air may cause the nailer to
explode which will cause death or
serious personal injury.
Do not exceed maximum operating
pressure of the nailer (100 PSI). The
nailer will not function properly. Do
not use a com-
pressed air source
capable of more than
200 PSI. The nailer
could explode which
will cause death or
serious personal
Never use gasoline or other flamma-
ble liquids to clean
the nailer. Never use
the nailer in the pres-
ence of flammable
liquids or gases.
Vapours could ignite by a spark and
cause an explosion which will result
in death or serious personal injury.
Always remain in
a firmly balanced
position when
using or handling
the nailer.
Do not modify or
disable the Work
Contact Element
(WCE). Do not tie or
tape the WCE or
trigger in a
depressed position.
Death or serious
personal injury could result.
Locate model and serial number on
tool magazine and record below:
Model No. ________________________
Serial No. _________________________
Retain these numbers for
future reference.
Do not touch
trigger unless
driving nails.
Never attach
air line to
nailer or carry
nailer while
touching the trigger. The tool could
eject a fastener which will result in
death or serious personal injury.
Brad Nailer
Operating Instructions
IN296500AV 2/04
Warning indicates
a potentially haz-
ardous situation which, if not avoided,
COULD result in death or serious
Always discon-
nect nailer from
air line before
clearing jams,
adjusting or
servicing the
nailer, relocating the nailer, or
when the nailer is not in use.
Always reconnect the air line
BEFORE loading any fasteners. The
nailer could eject a fastener causing
death or serious personal injury.
Protect your eyes and
ears. Wear Z87 safety
glasses, with side
shields. Wear hearing
protection. Employers
and users are respon-
sible for ensuring the user or any-
one near the nailer wears this safe-
ty protection. Serious eye injury or
permanent hearing loss could
Do not use a check
valve or any other
fitting which allows
air to remain in the
nailer. Death or seri-
ous personal injury could occur.
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-
erty damage! Retain instructions for future reference.
See Warranty on page 6 for important information about commercial use of this product.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
Instructions d’utilisation
Garantie Limitée
Cet article Mastercraft comprend aussi une garantie de réparation de trois (3) ans contre les défauts de fabrication et de
matériau(x). Mastercraft Canada consent, à sa discrétion, à réparer ou à remplacer toute pièce défectueuse sans frais au
cours de la période de garantie convenue lorsque l’article, accompagné de la preuve d’achat, est retourné par l’acquéreur
initial. Exclusion : usure ou bris causés par un usage abusif ou inapproprié.
Si cet article est utilisé à des fins commerciales, industrielles ou locatives, la garantie sera en vigueur pendant
quatre-vingt-dix (90) jours à compter de la date d’achat.
est une marque déposée de The Stanley Works
Campbell Hausfeld
est une marque déposée de Campbell Hausfeld/Scott Fetzer Co.
est une marque déposée de Black & Decker Corp.
est une marque déposée de Illinois Tool Works Inc.
Porter Cable
est une marque déposée de Porter-Cable Corp.
Senco est une marque déposée de Senco Products, Inc.
Finish Pro
est une marque de commerce deSenco Products, Inc.
Service d’assistance téléphonique sans frais : 1-866-220-2097