Filter
Top Products
10
ENGLISH
ENG
Explanatory notes on the information on page 2.
Changes due to technological progress reserved.
P
1
= rated input
P
2
= rated output
n
1
= no-load speed
n
2
= load speed
ø max = max. solid drill diameter
s max = max. impact rate
W = single impact strength
m = weight
D = spindle collar diameter
b = drill chuck chucking capacity
Typical A-weighted sound levels:
L
pA
= sound pressure level
L
WA
= sound power level
During operation, the acoustic level may
exceed 85 dB(A).
Wear hearing protection!
a
hw
= typical weighted acceleration in the
hand-arm area
Measured values established according to
EN 50144.
The stated technical specifications are subject to
tolerances (as specified in the respective current
standards).
14 Technical Specifications
6950.book Seite 10 Montag, 29. November 2004 12:54 12