Filter
Top Products
290 |
COMBO-MACHINES
ACCESSORIES FOR THE COMBO-MACHINES
Wheel sets
Order no.
Wheel set
For easy transportation
Suitable for: Multi 310
0920054102
Table length extensions
Order no.
Table length extension
For the secure
supporting of
long workpieces
With height-adjustable
support leg
Eccentric clamp:
easy to mount
and dismount
Can be mounted
at the front or
the rear
Suitable for: Multi 260
Length: 1.000 mm
Width: 150 mm
0920053947
FOR SAWING
Sliding table width extensions
Order no.
Sliding table width extension
For enlarging the
supporting surface
Mounted and dismounted
without tools
Length: 350 mm
Width: 262 mm
0920054072
Length guides
Order no.
Length guide
For use with the
cross-cut guide of
the sliding table
Enables the cutting
to length of workpieces
of up to 1,700 mm
Extractable
Length 1,100 mm
0920054110
Circular saw blades
Top cutting results thanks to teeth
ground on all sides and high accuracy
of flatness and concentric running
Tungsten carbide blades: long tool
life thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material Dimensions
mm
Tooth
pitch
Version Order no.
Tungsten
carbide
250 x 2,8 x 30 24 Alternately bevel-
ground tips
6.28012
Tungsten
carbide
250 x 2,8 x 30 34 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28045
Tungsten
carbide
250 x 2,8 x 30 42 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28046
Tungsten
carbide
250 x 2,8 x 30 60 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28049
Tungsten
carbide
250 x 3,2 x 30 60 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28050
Tungsten
carbide
250 x 2,8 x 30 80 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28087
Tungsten
carbide
250 x 2,8 x 30 80 Flat tooth/
trapezoidal
tooth,
5° negative
6.28088
FOR PLANING
HSS planer blade
For all soft woods and hard woods
Regrindable
18% tungsten = increased tool life
Dimensions
mm
Suitable for Packing unit Order no.
260 x 20 x 2,5 Multi 260 2 0920054030
310 x 20 x 2,5 Multi 310 2 0920054048
Planer blade adjusting devices
Order no.
Planer blade adjusting device
Suitable for all blade shafts
Simple handling and
exact cutter projection
In wooden case
Scope of delivery:
2 magnet planer blade
adjusting devices,
3 setting plates for
blade excess length
0911016397
Push block
Order no.
Push block
For the safe feed of short
workpieces while planing
0911060213