Filter
Top Products
| 285
PLANING MACHINES
Planer blades
Dimensions
mm
Reversib-
le planer
blades
Suitable for
Packing
unit
Order no.
HSS planer blade
For all soft woods and hard woods
Regrindable
18% tungsten = increased tool life
332 x 12 x 1,5
DH 330, DH 316 0911063549
334 x 16 x 2
DH 330 2 0911062119
260 x 20 x 3
HC 260 C
2)
,
HC 260 M
2)
, HC 260 K
1)
2 0911030721
304 x 25 x 3 HC 300 2
0911060167
1)
310 x 20 x 3 HC 333 G 2
0911053179
1)
410 x 25 x 3 HC 410 G 3
0911050390
1)
410 x 14 x 2,55
HC 410 G 3 0911051150
Disposable reversible planer blades
For all soft woods
260 x 18,6 x 1
HC 260 C
1)
,
HC 260 M
1)
, HC 260 K
2 0911030713
Carbide planer blade
For all hard woods, especially exotic woods, laminated
wood, hard paper, fabric reinforced laminates
Panel materials and plastics
Regrindable, long tool life
260 x 20 x 3
HC 260 C
2)
,
HC 260 M
2)
, HC 260 K
1)
2 0911030730
304 x 25 x 3 HC 300 2 0911060175
310 x 20 x 3 HC 333 G 2 0911053160
410 x 25 x 3 HC 410 G 3 0911050366
Planer blade and retaining strip conversion set
260 HC 260 C, HC 260 M 2 0911030845
Planer blade adjusting devices
Order no.
Planer blade adjusting device
Suitable for all blade shafts
Simple handling and exact cutter
projection
In wooden case
Scope of delivery: 2 magnet
planer blade adjusting devices,
3 setting plates for blade
excess length
Not suitable for: HC 310
0911016397
ACCESSORIES FOR DH 330
Order no.
Universal machine stand
For ideal working height
and secure base
Can also be used
on uneven surfaces
Collapsible, with height
compensation
0910057529
ACCESSORIES FOR HC 260 C, HC 260 K, HC 260 M
Order no.
Wheel set
For easy transportation
Suitable for: HC 260 C,
HC 260 M
0911003783
Wheel set
For easy transportation
Suitable for: HC 260 K
0911007100
Order no.
Slot boring machine
For the moulding/routing of
peg holes and oblong holes
For oblong holes up to 60 mm
deep and 125 mm long
With 2 hand lever operation
for longitudinal and
transverse motion
Including geared chuck,
extraction nozzle and
1 clamping device
Clamping table: 400 x 130 mm
Working height: 800 mm
Length adjustment: 125 mm
Drilling depth: 60 mm
Height adjustment: 130 mm
Chuck capacity: 1 - 10 mm
Extraction nozzle Ø: 100 mm
Suitable for: HC 260 M,
HC 260 K
0911003791
Eccentric clamping device
without stand
For clamping the
workpiece
0910009680
Clamping stand for slot boring
machine
Required for mounting the
eccentric clamping device
Ø 20x200mm thread M
20x1.5mm
Suitable for: HC 260 M,
HC 260 K
0911009811
Mortising bit set
All mortising bits can be
clamped in the geared chuck
With two straight cutters and
chip breaker grooves
Right-hand cutting
Ø 6, 8, 10 and 12 mm
Packing unit: 4
Suitable for: HC 260 M,
HC 260 K
0911030497
ACCESSORY FOR HC 300
Order no.
Wheel set
For easy transportation
0911060205
ACCESSORIES FOR HC 333 G
Order no.
Wheel set
For easy transportation
0911053195
Table length extension
For the secure
supporting of long
workpieces
With height adjustable
support leg and
auxiliary fence rail
Eccentric clamp - easy to
mount and dismount
Front/rear mounting
on the base support
system
HC 333: Mounting
possible on both sides
of the dressing plates
Length: 1.000 mm
Width: 200 mm
0910018469
Auxiliary fence/stop
For precise guiding with
narrow workpieces
Collapsible
0911053594
1)
Standard equipment of the planing machines
2)
Also requires planer blade and retaining strip conversion set 0911030845
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS