Filter
Top Products
284 |
HC 410 G -
5,5 DNB
Type HC 410 G - 5,5 DNB
Bestell-Nr. 0113041013
Powder-coated, sturdy and torsion-free welded construction
Sturdy feedgear mechanism that can be shut off
Swivelling switch terminal
Guide shafts, drive shafts and screwed joints are protected
against corrosion permanently by galvanised coating
Thickness table made of grey cast iron; guided by central
spindle
Optimum draw-in rollers, rubber-coated extraction rollers
for best contact pressure
High own weight for excellent stability
Dressing plate made of solid, non-abrasive grey cast iron
Robust machine housing for high stability and extensive
vibration-free work
Simple conversion from surface planer to bench
thicknesser without tools
With lockable switch
Sturdy support for safe work at ideal operating height
Slot boring machine can be attached to the
side (accessory)
For precise angular trimming of raw wood
Convenient height adjustment with crank handle
Planer blade with double edge
Trimming fence, swivelling 90°-45°
Dustproof according to TRGS 553 by FPH
Extensive range of accessories
For three phase current
Comparative device characteristics
Dimensions L x W x H 1.700 x 820 x 1.070 mm
Working height 850 mm
Dressing plates L x W 1.700 x 410 mm
Chip removal
- Planing 0 - 5 mm
- Thickness planing 0 - 5 mm
Material
- Dressing plates Grey cast iron
- Thickness table Grey cast iron
Thickness table L x W 670 x 405 mm
Passage height/width 230 mm/405 mm
Feed rate 7 m/min
Diameter of blade shaft 82 mm
Number of blades 3
Blade shaft speed 5.500 /min
Rated input power 5,5 kW
Output power 3,2 kW
Weight 250 kg
Standard equipment 3 integrated planer blades, gauge for setting the planer blades,
phase inverter, large, swivelling jointing fence,
chip ejection hood, push stick, extraction nozzle
PLANING MACHINES
EQUIPMENT FEATURES
Planing Machine
HC 410 G - 5,5 DNB