Filter
Top Products
12
ENGLISH
ENG
1 Declaration of Conformity
2Specified Use
3 General Safety Instructions
4 Special Safety Instructions
5Overview
6 Scope of Delivery
7 Commissioning
8 Attaching the Accessory
9Use
10 Cleaning
11 Troubleshooting
12 Accessories
13 Repairs
14 Environmental Protection
15 Technical Specifications
We, being solely responsible, hereby declare that
this product conforms to the standards and direc-
tives specified on page 2.
The fillet weld grinders, with original Metabo
accessories, are suitable for polishing metal
without the use of water.
Not suitable for use with roughing disk or cut-off
wheel.
Not suitable for grinding, sanding, wire brushing or
abrasive cutting-off operations.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.
WARNING
– Reading the operating
instructions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions.
Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Before using the power tool, carefully read through
and familiarise yourself with all the enclosed safety
information and the Operating Instructions. Keep
all enclosed documentation for future reference,
and pass on your power tool only together with this
documentation.
4.1 Safety Warnings Common for Grinding,
Sanding, Wire Brushing, Polishing or
Abrasive Cutting-Off Operations:
a)
This power tool is intended to function as a
polisher. Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/
or serious injury.
b)
Operations such as grinding, sanding, wire
brushing or cutting-off are not recommended
to be performed with this power tool.
Opera-
tions for which the power tool was not designed
may create a hazard and cause personal injury.
c)
Do not use accessories which are not specif-
ically designed and recommended by the tool
manufacturer.
Just because the accessory can
be attached to your power tool, it does not assure
safe operation.
d)
The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool.
Accessories running faster than
their rated speed can break and fly apart.
e)
The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool.
Incorrectly sized
Original instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a new Metabo power tool. Each Metabo power
tool is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless,
the service life of a power tool depends to a great extent on you. Please observe the information
contained in these instructions and the enclosed documentation. The more carefully you treat your
Metabo power tool, the longer it will provide dependable service.
Contents
1 Declaration of Conformity
2 Specified Use
3 General Safety Instructions
4 Special Safety Instructions
17027055_0411 KNS 18 LTX 150.book Seite 12 Dienstag, 26. April 2011 2:46 14