Filter
Top Products
T1E1-CF-01 IN THE NETWORK
NOTE: THE T1E1-CF-01 REQUIRES A CSU BETWEEN THE MEDIA
CONVERTER AND THE PUBLIC TELEPHONE NETWORK.
Features
• Media converter is framing independent (as ESF vs D4) and supports
all common line codes, (AMI, B8ZS, HDB3).
• Distance extensions of 2 km 850 nm multimode or 8 km 1300 nm
singlemode.
• Jitter attenuators optimize Bit Error Rate (BER) performance.
• Dry relay contacts allow media converter to be tied into separate
alarm circuit
• All Ones Insertion (AIS), indicated by LEDs, on loss of signal at
copper and/or fiber interface.
TECHNICAL SPECIFICATIONS
Standards Emissions: CISPR A
T1/E1 Physical Layer: ITU-T, ANSI, AT&T, ETSI
Case Dimensions 4.75" x 3.0" x 2.0" (119mm x 76mm x 50mm)
Shipping Weight 3 pounds (1.4 kilograms)
Delay 400nsec round trip
Environment Temperature: 0-50°C (32° to 122° F )
Humidity 10-90%, non condensing
Altitude 0-10,000 feet
Power Supply Requirements Replace power supply with only the equivalent
input rating (see below) and output rating (unregulated 9 VDC).
TN PN Requirement Location
3507 240 volts, 50 hertz United Kingdom
3342 230 volts, 50 hertz Europe
3340 120 volts, 60 hertz USA/Canada/Mexico
3346 100 volts, 50-60 hertz Japan
3511 240 volts, 50 hertz Australia
3537 (with power cord: 3522) South Africa
NOTE: This product also can be powered by the Transition Networks E-MCR
series media converter rack.
Warranty Lifetime
DECLARATION OF CONFORMITY
Name of Mfg: Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model: T1E1-CF-01 Series Copper-to-Fiber Media Converter
Part Number: T1E1-CF-01, T1E1-CF-01(SC), T1E1-CF-01(SM),
T1E1-CF-01(LH)
Regulation: EMC Directive 89/336/EEC
Purpose: To declare that the T1E1-CF-01 and T1E1-CF-01(SM) to which this
declaration refers is in conformity with the following standards.
EMC-CISPR 22: 1985 Class A; EN 55022: 1988 Class A; EN 50082-1:1992;
EN 60950 A4:1997; IEC 801.2, IEC 801.3, and IEC 801.4; IEC 950
I, the undersigned, hereby declare that the equipment specified above conforms to the
above Directive(s) and Standard(s).
_June 8, 1999_____
Stephen Anderson, Vice-President of Engineering Date
UTP/STP
Fiber
CSU
To Telco
OR
T1 OR E1
Network Extension
OR
OR
To Telco
E1
E1
E1
T1 or E1
T1 or E1
T1 or E1
T1 or E1