Filter
Top Products
OM-2219 Page 16
4-2. Ground Fault Circuit Interrupter (GFCI)
Ref. 801 977-A / Ref. 802 180-A
1 Ground Fault Circuit
Interrupter GFCI
2 Spring-Loaded Door (Shown
Open)
GFCI provides ground fault protec-
tion for the input power connection.
If a ground fault is detected, GFCI
RESET button pops out and the unit
will not function. Press button to
reset.
To Test the GFCI:
Prepare machine for normal cut-
ting. Push the TEST button. Unit
lights and fan should remain on. Air
should go on with trigger pull.
Y If a pilot arc ignites, DO NOT
USE YOUR EQUIPMENT. Un-
plug equipment or turn Off
power at generator. Consult
a qualified electrician.
If the GFCI tests okay, restore
power by pushing the RESET but-
ton and releasing it. The pilot arc
should work as usual. If the GFCI
fails to reset properly, DO NOT
USE YOUR EQUIPMENT. Unplug
equipment or turn Off power at
generator. Consult a qualified elec-
trician.
If the GFCI trips by itself at anytime
during use, reset the GFCI and test
it as explained above. If the GFCI
fails to reset properly, DO NOT
USE THE EQUIPMENT. Unplug
equipment or turn Off power at
generator. Consult a qualified elec-
trician.
3 Fuse F1 (0.5 A only)
Fuse F1 is part of the ground fault
circuit interrupter. If F1 opens:
• check if work lead is properly
connected to work piece
• check the GFCI as explained
above.
Y If the GFCI does not work
properly, DO NOT USE
YOUR EQUIPMENT. Unplug
equipment or turn Off power
at generator. Consult a quali-
fied electrician.
1
. Press button to reset circuit breaker. If the GFCI opens, check
power cord for damage. If the GFCI continues to open, contact
a Factory Authorized Service Agent.
2
Rear of
Unit
19
19
20
20
20
20
20
20
20
20
20
20
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Ground Fault Circuit Interrupter Test Record
Operate TEST switch on ground fault circuit interrupter before each use and
at least once a month. Record date of test in table below.
3