Filter
Top Products
. Complete Parts List available at www.MillerWelds.com
OM-4417 Page 27
8-3. Adjusting Engine Speed (Standard Models Only)
803 594-B
Tools Needed:
3750 ± 30 rpm (62 Hz)
After tuning engine, check engine
speed. See table for proper no load
speed. If necessary, adjust speed
as follows:
Start engine and run until warm.
1 Adjustment Screw
To increase speed, turn screw in
(clockwise). To decrease speed,
turn screw out (counterclockwise).
! Stop engine. Close fuel
valve.
1