Miller Electric Millermatic 350 Welder User Manual


 
. A complete Parts List is available at www.MillerWelds.com
OM-1327 Page 20
3-14. Selecting Input Voltage (200/230/460 Volt Models Only)
803 539-B / 804 042-A
! Turn Off welding power
source, disconnect input
power, and check voltage on
input capacitors according
to Section 6-3 before
proceeding.
. Check input voltage available
at site.
. Incorrect linking can damage
unit and void the warranty.
1 Voltage Selection View
Window
Check voltage selected in unit.
Changing selection is only neces-
sary if selected value does not
match available input voltage.
2 Relinking Board PC6
3 Mounting Screws
4 Receptacle RC23
(Connection For 230 VAC
Input Power)
5 Receptacle RC46
(Connection For 460 VAC
Input Power)
Move relinking board as needed
and connect plug PLG32 (in unit) to
RC23 or RC46 according to input
power voltage.
1
Tools Needed:
5/16 in
. Be sure to reinstall all four screws
securing relinking board in place.
2
3
4
3
5