Milwaukee 6072 Sander User Manual


 
page 11
Maintaining Tools
Keep your tool in good repair by adopting a regular maintenance program.
Before use, examine the general condition of your tool. Inspect guards,
switches, tool cord set and extension cord for damage. Check for loose
screws, misalignment, binding of moving parts, improper mounting, broken
parts and any other condition that may affect its safe operation. If abnormal
noise or vibration occurs, turn the tool off immediately and have the problem
corrected before further use. Do not use a damaged tool. Tag damaged tools
“DO NOT USE” until repaired (see “Repairs”).
Under normal conditions, relubrication is not necessary until the motor
brushes need to be replaced. After six months to one year, depending on
use, return your tool to the nearest MILWAUKEE service facility for the
following:
• Lubrication
Brush inspection and replacement
Mechanical inspection and cleaning (gears, spindles, bearings, housing,
etc.)
Electrical inspection (switch, cord, armature, etc.)
Testing to assure proper mechanical and electrical operation
MAINTENANCE
Cleaning
Clean dust and debris from vents. Keep the tool handles clean, dry and
free of oil or grease. Use only mild soap and a damp cloth to clean your
tool since certain cleaning agents and solvents are harmful to plastics and
other insulated parts. Some of these include: gasoline, turpentine, lacquer
thinner, paint thinner, chlorinated cleaning solvents, ammonia and house-
hold detergents containing ammonia. Never use ammable or combustible
solvents around tools.
Repairs
If your tool is damaged, return the entire tool to the nearest service cen-
ter.
WARNING
To reduce the risk of injury, always unplug your tool before per-
forming any maintenance. Never disassemble the tool or try to do
any rewiring on the tool's electrical system. Contact a MILWAUKEE
service facility for ALL repairs.
WARNING
To reduce the risk of injury, electric shock and damage to the tool,
never immerse your tool in liquid or allow a liquid to ow inside
the tool.
ACCESSORIES
To reduce the risk of injury, always unplug the tool before attach-
ing or removing accessories. Use only speci cally recommended
accessories. Others may be hazardous.
WARNING
FIVE YEAR TOOL LIMITED WARRANTY
For a complete listing of accessories refer to your MILWAUKEE Elec-
tric Tool catalog or go on-line to www.milwaukeetool.com. To obtain a
catalog, contact your local distributor or a service center.
Every MILWAUKEE electric power tool (including battery charger) is war-
ranted to the original purchaser only to be free from defects in material and
workmanship. Subject to certain exceptions, MILWAUKEE will repair or
replace any part on a electric power tool which, after examination, is de-
termined by MILWAUKEE to be defective in material or workmanship for a
period of ve (5) years* after the date of purchase. Return the electric power
tool and a copy of proof of purchase to a MILWAUKEE factory Service/Sales
Support Branch location or MILWAUKEE Authorized Service Station, freight
prepaid and insured, are requested for this warranty to be effective. This
warranty does not apply to damage that MILWAUKEE determines to be
from repairs made or attempted by anyone other than MILWAUKEE autho-
rized personnel, misuse, alterations, abuse, normal wear and tear, lack of
maintenance, or accidents.
* The warranty period for Hoists (lever, hand chain, & electric chain hoists),
all Ni-CD battery packs, Work Lights (cordless ashlights), Job Site Radios,
and Trade Titan™ Industrial Work Carts is one (1) year from the date of
purchase. *The warranty period for Li-Ion battery packs that do not contain
V™-technology – 4.0 volts through 18.0 volts - is two (2) years from the
date of purchase.
*There is a separate warranty for V™-technology Li-Ion Battery Packs V™18
volts and above that accompany V™-technology cordless power tools:
*Every MILWAUKEE V™-technology Li-Ion Battery Pack 18 volts or above is
covered by an initial 1000 Charges/2 Years free replacement warranty. This
means that for the earlier of the rst 1000 charges or two (2) years from the
date of purchase/ rst charge, a replacement battery will be provided to the
customer for any defective battery free of charge. Thereafter, customers will
also receive an additional warranty on a pro rata basis up to the earlier of the
rst 2000 charges or ve (5) Years from the date of purchase/ rst charge.
This means that every customer gets an additional 1000 charges or three
(3) years of pro rata warranty on the V™-technology Li-Ion Battery Pack 18
volts or above depending upon the amount of use. During this additional
warranty period, the customer pays for only the useable service received
over and above the rst 1000 Charges/2 years, based on the date of rst
charge and number of charges found on the battery pack via Milwaukee’s
V™-technology Service Reader.
Warranty Registration is not necessary to obtain the applicable warranty
on a MILWAUKEE product. However, proof of purchase in the form of a
sales receipt or other information deemed suf cient by MILWAUKEE, is
requested. The manufacturing date of the product will be used to determine
the warranty period if no proof of purchase is provided at the time warranty
service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT
REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT
FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO
NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE
PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR
FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS
ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE
OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO,
ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN
OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GEN-
ERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
USE OR PURPOSE, AND ALL OTHER WARRANTIES.