Filter
Top Products
page 4
FUNCTIONAL DESCRIPTION
1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Keep hands away from all cutting edges and moving parts.
3. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against
your body leaves it unstable and may lead to loss of control.
4. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out
microscopic particles.
SPECIFIC SAFETY RULES
Amperes
Double Insulated
Symbology
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating
Current
No Load Strokes
per Minute (RPM)
1. Orbit control switch
2. Handle adjustment button
3. Handle
4. Quik-Lok
®
cord
5. Trigger
6. Insulating Boot
7. Shoe release lever
8. Adjustable pivot shoe
9. Blade
10. Quik-Lok
®
blade clamp
Strokes
per Minute
0 - 3000
Volts
AC
120
Catalog
Number
6524-21
Specifications
Amps
7.5
Length of
Stroke
3/4"
Straight Cut
Orbital Cut
10
1
4
5
6
7
8
9
3
2