Filter
Top Products
10
Settings
HEATER
AIR SPEED
HEATER
OFF / ON
STANDARD / HIGH
AIR SPEED
OFF
STANDARD
ON
HIGH
9
8
Switches
Switch box cover
Mounting
screws
Factory default settings
Main unit
Groove
Front panel
Front panel
mounting
screws
Drain tank
Air filter
Switching the air speed switch and heater switch settings
Check the heater ON/OFF settings and air speed HIGH/STANDARD settings with the
customer beforehand.
(The user cannot adjust the settings after installation is complete.)
(The JT-SB216KSN-W-E does not have an air volume switch or heater switch.)
Cautions
Do not install when the product (power cord) is electrified.
Doing so may result in electric shocks.
1.Remove the mounting screw (1) from
the switch box cover, and remove the
switch box cover.
2.Change the settings.
3.After checking the switches, fix the
switch box cover back in its original
position.
1.Engage the groove of the front panel on
the appliance.
2.Reattach the front panel with the front
panel mounting screw
s (2).
3.Check that the front panel is fitted securely.
4.Attach the air filter.
5.Check that the air filter is inserted correctly,
all the way to the back.
6.Attach the drain tank.