Napa Essentials 85-300A Battery Charger User Manual


 
• 8 •
7.3 Connect the POSITIVE (RED) charger ring terminal to the
POSITIVE (POS, P, +) post of the battery.
7.4 Position yourself and the free end of the cable you previously
attached to the NEGATIVE (NEG, N, -) battery post as far away
from the battery as possible – then connect the NEGATIVE
(BLACK) charger ring terminal to the free end of the cable using a
nut and bolt through both ring terminals.
7.5 Do not face the battery when making the nal connection.
7.6 Connect the charger AC supply cord to the electrical outlet.
7.7 When disconnecting the charger, always do so in the reverse
order of the connecting procedure and break the rst connection
while as far away from the battery as practical.
7.8 A marine (boat) battery must be removed and charged on shore.
To charge it onboard requires equipment specially designed for
marine use.
8. GROUNDING AND AC POWER CORD CONNECTIONS
RISK OF ELECTRIC SHOCK OR FIRE.
8.1 This battery charger is for use on a
nominal 120 volt circuit. The plug must
be plugged into an outlet that is properly
installed in accordance with all local codes
and ordinances. The plug pins must t the
receptacle (outlet).
8.2 Never alter the AC cord or plug provided – if it does
not t the outlet, have a proper outlet installed by a qualied
electrician. An improper connection can result in a risk of an
electric shock or electrocution. NOTE: Pursuant to Canadian
Regulations, use of an adapter plug is not allowed in Canada. Use
of an adapter plug in the United States is not recommended and
should not be used.
8.3 Recommended minimum AWG size for extension cord:
• 150 feet (45.7 meters) long or less – use an 18 gauge (0.82 mm
2
)
extension cord.