Filter
Top Products
• Do not use your tool where there is a risk of causing a fire or an explosion; e.g., in
the presence of flammable liquids, gasses, or dust. Power tools create sparks, which
may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control, so visitors should remain at a safe distance from the work area.
ELECTRICAL SAFETY
WARNING!
Always check to ensure the power supply corresponds to the voltage on the
rating plate.
• Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from
heat, oil, sharp edges or moving parts. Replace damaged cords immediately.
Damaged cords may cause a fire and increase the risk of electric shock.
• Grounded tools must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances.
Never remove the grounding prong or modi-
fy the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if
you are in doubt as to whether the outlet is properly grounded.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and
refrigerators. There is an increase risk of electric shock if you body is grounded.
• When operating a power tool outside, use an outdoor extension cord marked “W-A”
or “W”.
These cords are rated for outdoor use and reduce the risk of electric shock.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not let your fingers touch the terminals of plug when installing or removing the
plug to or from the outlet.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication.
A moment of inattention while operating power tools may
result in serious personal injury.
• Dress properly. Do not wear loose clothing of jewelry. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in
moving parts. Air vents often cover moving parts and should be avoided.
• Always use the appropriate ANSI Z87.1-rated eye protection and other safety equipment.
Safety equipment such as dust mask, non-skid safety shoes, hardhat, or hearing protection
used for appropriate conditions will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the off position before plugging
tool into power outlet. Do not carry the power tool with your finger on the switch.
• Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
• Remove adjusting keys or wrenches before turning the tool on. A wrench or key that
is left attached to a rotating part of the tool may result in personal injury
.
2