Filter
Top Products
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC.
Product! For future reference, please complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the
entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment
cannot be responsible for issues arising from modification. We strongly recommend
this machine is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application,
DO NOT use the machine until you have first contacted Northern Tool + Equipment
to determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This bench grinder is designed for general metal grinding and sharpening.
TECHNICAL SPECIFICATIONS
Description Specifications
Voltage/Frequeney: 120V / 60Hz
Power: 3/4 HP
Rated running speed: 3550 RPM
Wheel Size: 8" x 7" x
5
/8"
GENERAL SAFETY RULES
WARNING! Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
WARNING! The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep work area clean,
free of clutter and well lit. Cluttered and dark work areas can
cause accidents.
• Do not use your tool where there is a risk of causing a fire or an explosion; e.g. in
the presence of flammable liquids, gasses, or dust. Power tools create sparks, which may
ignite the dust or fumes.
1