Filter
Top Products
15
C. Controls and Functions
Prior to attempting to operate the engine, read the information
contained in the engine owner's manual. An engine owner’s manual is
supplied with every gasoline powered concrete saw.
1. Check Oil: Add oil if low. Refer to the Deutz engine owner's manual for the
recommended SAE viscosity grades. Capacity of oil is 6.4 qt (6.1 liters)
2. Check Fuel: Fill if low. Use only Diesel Fuel rated for on Highway use.
Never use a gasoline or an oil and gasoline mixture!
3. Air Cleaner: Never run the engine without the air cleaner! Rapid engine
wear will result from contaminants being drawn through the carburetor and
into the engine.
4. Controls/Gauges:
Location of Controls and Gauges
Engine Control
Module w/Hour
Mete
r
Oil
Pressure
Tachometer
Volt Meter
Ignition Power
Key Switch
Vernier
Throttle
Raise/Lower
Switch
Forward/Reverse
Lever
Transmission
Engage/Disengage Lever
Fuel Cap
w/Gauge
Depth Lock
Depth Gauge
12-volt
Power Point
Fuse
12-volt
Power Point
Switch
Blade Saver
Switch
Optional
Water Pump
Switch
Emergency Kill
Switch (Hidden
from view by
Forward/Reverse
Lever)