Norton Abrasives C3130 Saw User Manual


 
31
Oil:
Checking the Oil ‡:
1. Fill oil into oil pan up to the “Max” mark on
the Engine Dipstick. The Engine Dipstick is
located on the rear of the Engine, between
the Engine and the Console. Use either of
the two (2) Oil Filler Necks one is located
on top of the engine, the other is located on
the rear of the Engine to add oil. If the oil
level is only just above the “Min” mark,
more oil must be added. See the figure
below: Oil Filler Neck and Dipstick
locations.
2. Start the engine and run at an idle speed for at least 2 minutes.
For information on how to start the engine see section B. Engine
subsection 5. Starting the Engine of this manual (pages 14 to
15).
3. Turn the Engine off
4. Turn the engine off.
5. Check the oil level using the Engine Dipstick
Oil Filler Neck and Dipstick Locations ‡
Oil Filler Neck
(Top of Engine)
Oil Filler Neck
(Rear of Engine)
Oil Dipstick
(Rear of Engine)