Filter
Top Products
Once the MATE recognizes each FX (and OutBack Charge Controller), push and hold the rst two soft
keys simultaneously to return to the MAIN menu. To program the FXs, go to the ADV/FX/STACK menu
on the MATE navigating with the following steps:
• Press the <ADV> soft key.
NOTE: Pressing and holding the rst two soft keys
at the same time will always bring up the Main
Menu screen.
• Push any soft key on the ADV/SETTINGS/WARNING
screen and go to the ADV/PASSWORD screen.
MAIN--------------------------
12:12:16A
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could adversely aect
system performance
PROGRAMMING THE FXS
• The screen displays <132>. Press the <INC> button
until it scrolls to the password 141.
ADV/PASSWORD
enter the password
132
ENTER INC DEC EXIT
ADV/PASSWORD
enter the password
141
ENTER INC DEC EXIT
• Push the <ENTER> soft key.
10