Filter
Top Products
-
6
-
fect the power tools operation.
If damaged, have the power tool
repaired before use.
Many accidents are caused by
poorly maintained power tools.
6) Keep cutting tools sharp and
clean.
Properly maintained cutting tools
with sharp cutting edges are less
likely to bind and are easier to con-
trol.
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions and in
the manner intended for the par-
ticular type of power tool, taking
into account the working con-
ditions and the work to be per-
formed.
Use of the power tool for opera-
tions different from those intended
could result in a hazardous situa-
tion.
Battery Tool Use and Care
1) Ensure the switch is in the off
position before inserting battery
pack.
Inserting battery pack into pow-
er tools that have the switch on in-
vites accidents.
2) Recharge only with the charger
specified by the manufacturer.
A charger that is suitable for one
type of battery pack may create a
risk of fire when used with another
battery pack.
3) Use power tools only with spe-
cifically designated battery
packs.
Use of any other battery packs may
create a risk of injury and fire.
4) When battery pack is not in use,
keep it away from other metal
objects like paper clips, coins,
keys, nails, screws, or oth-
er small metal objects that can
make a connection from one ter-
minal to another.
Shorting the battery terminals to-
gether may cause burns, or a fire.
5) Under abusive conditions, liq-
uid may be ejected from battery;
avoid contact. If contact acci-
dentally occurs, flush with wa-
ter. If liquid contacts eyes, addi-
tionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
Service
1) Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
power tool is maintained.
Safety instructions for all
operations
Safety warning common for Grinding
or Abrasive Cutting-off operations:
1) This power tool is intended to
function as a grinder, or cut-off
tool. Read all safety warnings,
instructions, illustrations and
specifications provided with this
power tool. Failure to follow all in-
structions listed below may result
in electric shock, fire and/or seri-
ous injury.
2) Operations such as sanding,
wire brushing, polishing are not
recommended to be performed
with this power tool. Operations
for which the power tool was not
designed may create a hazard and
cause per-sonal injury.
3) Do not use accessories which
are not specifically designed and
recommended by the tool manu-
facturer. Just because the acces-
sory can be attached to your power
tool, it does not assure safe opera-
tion.
4) The rated speed of the accesso-
ry must be at least equal to the
maximum speed marked on the
power tool. Accessories running
faster than their RATED SPEED
can break and fly apart.
5) The outside diameter and the
thickness of your accessory
must be within the capacity rat-