Filter
Top Products
-
10
-
-
11
-
NOTE:
When charging a cool battery
pack (below 5°C (41°F)) in a warm
place, leave the battery pack at the
place and wait for more than one
hour to warm up the battery to the
level of the ambient temperature.
Otherwise battery pack may not be
fully charged.
Cool down the charger when
charging more than two battery
packs consecutively.
Do not insert your fingers into con-
tact hole, when holding charger or
any other occasions.
CAUTION:
Do not use power source from an
engine generator.
Do not cover vent holes on the
charger and the battery pack.
.LAMP INDICATIONS
Red Flashing
Red Lit
Green Flashing quickly
Orange Lit
Orange Flashing
Charger is plugged into the AC outlet.
Ready to charge.
Now charging
Charging is completed.
Battery pack is warm. Charging will begin
when temperature of battery pack drops.
Charging is not possible. Clogged with
dust or malfunction of the battery pack.
. MAINTENANCE
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, ben-
zine, or other volatile solvents for cleaning.
BATTERY RECYCLING
ATTENTION:
FOR Ni-MH Battery Packs, EY9251
A nickel metal hydride battery that is recyclable powers the product you have pur-
chased.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
.ACCESSORIES
Use only bits suitable for size of drill’s chuck.
MAXIMUM RECOMMENDED CAPACITIES
EY6450 MATERIAL / CONDITION SPEED
Screw
driving
Wood screw ø 4.2 mm (3/16")
Ï
75 mm (3") HIGH
Self-drilling screw ø 3 mm (1/8")
Ï
13 mm (1/2") SPC t = 1.6 mm (1/16")
HIGH
Drilling
Wood ø 50 mm (2") Yellow pine t = 38 mm (1-1/2") LOW
Metal ø 13 mm (1/2") SPC t = 1.6 mm (1/16") HIGH