Filter
Top Products
Ref. No. 1B Procedure 1A →
→→
→ 1B Removal and attachment of the Motor.
(Removal)
1. Take out the motor with the driving block from housing.
2. Separate the motor assembly from the driving block.
3. Take out the motor rotor assembly from the motor stator.
NOTE :
Make sure not to damage the magnet by motor rotor.
(Attachment)
1. Insert the motor rotor assembly into the stator with care of hitching
FET.
NOTE :
Make sure that there is no metal powder around the motor rotor.
Ref. No. 1C Procedure 1A →
→→
→ 1B →
→→
→ 1C Removal of the Driving Block.
1. Take out the planet gears and pins slightly tapping the driving
block on the table.
4
EY7540-U1 /