Filter
Top Products
16
Servicing
Clearing a Jam (continued)
Make certain magazine mounting screws are tight and
magazine is tight to nose. Attempting to fire tool withaloose
magazine will result in loss of staple control, damage to tool,
or staple discharge toward operator.
Air Filter
Open the cover by pressing slightly above the yellow
adapter, and pivoting the cover open. The air filter simply
lifts out.
Tap the filter GENTLY to remove any dust. Check and clean
the air filter every two days. Soap and water restores the
filter to a "like new" condition.
End-of-Workday Routine
These simple steps are based onmaintaining the safety and
operational efficiency of the Cordless Stapler.
Before you leave the work site:
1. Remove battery and store in tool case. Always use the
Cordless Stapler case for transporting and storing the
tool.
2. Dispose of all empty fuel cells. Remember to dispose of
these cells where they will not be crushed, punctured,
burned or found by children.
When you get home:
1. Place the battery in its charger if it needs charging as
indicated by the red charge light on the handle.
2. Wipe your Cordless Stapler with a clean, soft cloth.
3. Remove and clean the filter every two days.
4. Checkwork contactingelement to ensureitis operating
freely.
Paslode Cordless Tool Accessories
A variety of accessories are available for the Paslode
Corldess Stapler:
Battery - Part No. 402500
Clear Safety Glasses - Part No. 401382
Paslode Cordless Lubricating Oil - Part No. 401482
Battery Charger Kit - Part No. 900200
Paslode Cordless Stapler Carrying Case - Part No.
900362
Degreaser Cleaner - Part No. 219086
Automotive Adapter - Part No. 900507
Contact your Paslode
®
representative for additional
information.
Tools
A 5/32 Hex Wrench (Part No. 401331)is provided with
each Cordless 16 Gauge Stapler.