Filter
Top Products
2
Introduction and Warranty
Paslode Cordless 16 Gauge Stapler
Operating Manual
T
his manual is intended to acquaint you with the Paslode
Cordless 16 ga.Stapler. Unlike other power fastening
tools, the Cordless Stapler is powered by an internal
combustion linear motor. In simpler terms, your Cordless
Stapler is powered by a motor similar to the one that
powers an automobile. The Cordless Stapler ignites a
fuel and air mixture to produce the energy to drive the
motor, which in turn drives the fastener. As you will see,
the Cordless Stapler is totally self-contained. It carries its
own fuel supply and battery, along with a supply of
fasteners.
For ease of use, this manual is divided into sections (see
Contents). Each section of the manual is written with you,
the tooloperator, inmind.We haveleft outallof thetechnical
terms so that you can readily understand how to get the
maximum performance from your Cordless Stapler, and
how to avoid damaging the tool or injuring yourself. But, to
accomplish this, we need you to do two things:
1. READ THE MANUAL FROM COVER TO COVER
BEFORE USING THE TOOL.
2. FOLLOW ALL INSTRUCTIONS IN THE MANUAL.
The Cordless Stapler should be handled like other power
fastening tools that you use. Like most tools, when used
improperly it could result in injury. If you are going to allow
others to use the Cordless Stapler, it is your responsibility
to make sure that they also read and comply with the
instructions in this manual before attempting to operate
the tool.
Should you have questions about the Cordless Stapler ,
or wish to obtain additional copies of this manual, please
contact your Paslode
®
representative. The space below is
provided so that you may record your representative's
name, address, and telephone number.
My Paslode representative is:
Name
Address
piZetatSytiC
Telephone Number
Paslode
®
Cordless Warranty and Limitations
Paslode warranties that new Cordless power fastening tools,
parts and accessories will be free from defects in material and
workmanship for the period shown below, after the date of
delivery to the original user.
ONE-YEAR LIMITED WARRANTY
A one-year warranty will apply to all parts, except those listed
below as normal wearing parts, or parts which are specifically
covered by an extended warranty.
FIVE-YEAR EXTENDED LIMITED WARRANTY
A five-year warranty will apply to all molded nylon parts:
• Motor Housing, Cap and Grille
• Handle Halves and Actuator
• Trigger
90-DAY LIMITED WARRANTY
A 90-day warranty applies to the following parts, which are
considered normal wear parts:
• Bumper
• Driver Blades
• O-Rings
• Piston Rings
WARRANTY STATEMENT
This warranty is limited to tools sold and service requested in the
United States. To obtain information on warranty service in the
United States, refer to the Service Center listing that was provided
with your tool.
Paslode's sole liability hereunder will be to replace any part or accessory
whichprovestobedefectivewithinthespecifictimeperiod.Anyreplacement
part or accessory provided in accordance with this warranty will carry a
warranty for the balance of the period of warranty applicable to the part it
replaces. This warranty does not apply to part replacement required due
to normal wear.
This warranty is void on any tool which has been subjected to misuse,
abuse,accidentalorintentionaldamage, usewithfasteners,fuel,batteries,
or battery chargers not meeting Paslode specification, size, or quality,
improperly maintained, repaired with other than genuine Paslode
replacement parts, damaged in transit or handling, or which, in Paslode's
opinion, has been altered or repaired in a way that affects or detracts from
the performance of the tool.
PASLODE MAKES NO WARRANTY, EXPRESSED
OR IMPLIED,
RELATING TO MERCHANTABILITY, FITNESS, OR OTHERWISE,
EXCEPTASSTATEDABOVE,andPaslode'sliabilityASSTATEDABOVE
AND AS ASSUMED ABOVE is in lieu of all other warranties arising out of,
or in connection with, the use and performance of the tool, except to the
extent other wise provided by applicable law. PASLODE SHALL IN NO
EVENTBELIABLEFORANYDIRECT,INDIRECT,ORCONSEQUENTIAL
DAMAGES, INCLUDING, BUT NOT LIMITED TO, DAMAGES WHICH
MAY ARISE FROM LOSS OF ANTICIPATED PROFITS OR
PRODUCTION, SPOILAGE OF MATERIALS,, INCREASED COST OF
OPERATION, OR OTHERWISE.
Paslode reserves the right to change specifications, equipment, or designs at any time without
notice and without incurring obligation.