Filter
Top Products
OnSite 2621 & 2635 Quick Start Guide 5
4.0 Log onto the web management interface
You will now access the web management Graphical User Interface (GUI) to configure the OnSite using a stan-
dard web browser (such as Internet Explorer or Netscape browser).
1. At your PC, open a web browser and enter the IP address you assigned to the OnSite’s Ethernet LAN port
in step 2 of section 2.2 “Modify the IP address” on page 4.
2. Log in to the web management home page using the username superuser and the password superuser.
Figure 3. OnSite web management home page
3. Now you can use the OnSite’s web management pages to complete your configuration (see section 6.0
“Complete the installation” on page 7).