Filter
Top Products
SmartNode 5200 Overview 17
SmartNode 5200 Getting Started Guide 1 • General Information
Figure 4. SmartNode 5200 front panel
Reset
The reset button (see
Figure 3
) has three functions:
•
Restart the unit with the current startup configuration—Press (for less than 1 second)
and release the Reset button to restart the unit with the current startup configuration.
•
Restart the unit with factory default configuration—Press the Reset button for
5 seconds until the Power LED (see
Figure 4 on page 17
) starts blinking to restart the
unit with factory default configuration.
•
Restart the unit in bootloader mode (to be used only by trained SmartNode techni-
cians)—Starting with the unit powered off, press and hold the Reset button as you
apply power to the unit. Release the Reset button when the Power LED starts blink-
ing so the unit will enter bootloader mode.
Table 2. Rear panel ports (Continued)
Port Description