Pioneer PX-42XM3 Work Light User Manual


 
61
the time of AUTO ID execution.
60. VIDEO WALL SETTING
Function
External control apparatus sets four screens or nine screens as a video
wall.
Transmission Data
DFH 80H 60H F3H 03H DATA00 DATA01 DATA02 CKS
DATA00: 01H:1 screen
(Matrix diplay function does not work.)
04H:4 screens (2*2 video wall)
09H:9 screens (3*3 video wall)
DATA 01:
00H-FFH:Master’s ID
*1
DATA 02:
01H : Video1
02H : Video2
03H : Video3
04H : HD (HD1 or DTV or DTV1)
05H : HD2 (DTV2)
06H : HD3 (DTV3)
07H : RGB1 / PC1
08H : RGB2 / PC2
09H : RGB3 / PC3
*: This command is used to following system.
1. The system configuration is video wall system (4screens or 9screens).
Then please connect each PDP by wired cable.
In the case of 16 screens or 25 screens video wall system, please refer
to No.56.”MULTI MODE Select”.
2. The ID number from a master
1
display is set the continuous number.
DATA00: Specify the composition of a multi-system.
DATA01: Set master’s ID
*1
.
*1: “Master” means the 1st set of PDP at the time of cable connection at
the time of AUTO ID execution.