Polycom 5040 Battery Charger User Manual


 
Polycom Kirk 5020-5040 User Guide Information
78 Polycom, Inc.
temporarily. If possible, they will notify you in advance, But if advance notice
is not practical, you should be notified as soon as possible. You will be informed
of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
telephone system, If they do and it is possible, you will be notified in advance
to give you an opportunity to maintain uninterrupted telephone service. If you
experience trouble with this telephone system, disconnect it from the network
until the problem has been corrected or until you are sure that the equipment
is not malfunctioning.
Note: This equipment has been tested and found to comply with the limits for
a class B digital device, pursuant to local regulations. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Hearing Aid Compatibility: This equipment is hearing-aid compatible, as
defined in Section 68.316 of Part 68 FCC Rules.
FCC Note: This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
SAR: Device has been tested for SAR compliance for head and body worn
configurations. The highest reported SAR values are: head 0.049 W/kg (5020)
/ 0.206 W/kg (5040) and body worn 0.075 W/kg(5020) / 0.330 W/kg (5040).
IC Note: Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
The Term “IC“: before the certification/registration number only signifies that
the Industry Canada technical specifications were met.
Privacy of communications may not be ensured when using this telephone.