Filter
Top Products
3 - ENG 1000003145
• If electrical sparks from com-
pressor come into contact with
flammable vapors, they may
ignite, causing fire or explosion.
• If spraying flammable materi-
als, locate compressor at least
20 feet (6.1 m) away from spray
area. An additional length of
air hose may be required.
• Store flammable materi-
als in a secure location
away from compressor.
• Restricting any of the com-
pressor ventilation openings
will cause serious overheat-
ing and could cause fire.
• Never place objects against
or on top of compressor.
• Operate compressor in an open
area at least 12" (30.5 cm) away
from any wall or obstruction that
would restrict the flow of fresh
air to the ventilation openings.
• Operate compressor in a
clean, dry well ventilated area.
Do not operate unit indoors
or in any confined area.
• Unattended operation of this prod-
uct could result in personal injury
or property damage. To reduce the
risk of fire, do not allow the com-
pressor to operate unattended.
• Always remain in attendance with
the product when it is operating.
• Always turn off and unplug
unit when not in use.
HAZARD
RISK TO BREATHING (ASPHYXIATION)
WHAT CAN HAPPEN HOW TO PREVENT IT
• The compressed air directly from
your compressor is not safe
for breathing. The air stream
may contain carbon monoxide,
toxic vapors, or solid particles
from the air tank. Breathing
these contaminant's can cause
serious injury or death.
• Air obtained directly from the
compressor should never be
used to supply air for human
consumption. In order to use air
produced by this compressor
for breathing, suitable filters and
in-line safety equipment must be
properly installed. In-line filters and
safety equipment used in conjunc-
tion with the compressor must
be capable of treating air to all
applicable local and federal codes
prior to human consumption.
• Sprayed materials such as
paint, paint solvents, paint
remover, insecticides, weed
killers, may contain harm-
ful vapors and poisons.
• Work in an area with good cross
ventilation. Read and follow the
safety instructions provided on
the label or safety data sheets
for the materials you are spray-
ing. Always use certified safety
equipment: OSHA/MSHA/NIOSH
respiratory protection designed for
use with your specific application.