Porter-Cable 36-675 Saw User Manual


 
29
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call
the DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
When ripping work less than 4 inches wide, a push stick should be used to complete the feed and could
easily be made from scrap material by following the pattern shown in Fig. 69.
Fig. 69
PUSH STICK
MAKE FROM 1/2
"
OR 3/4
"
WOOD OR THICKNESS
LESS THAN WIDTH OF
MATERIAL TO BE CUT
CUT OFF HERE TO
PUSH 1/4
"
WOOD
CUT OFF HERE TO
PUSH 1/2
"
WOOD
NOTCH TO HELP
PREVENT HAND
FROM SLIPPING
1/2
"
SQUARES
CONSTRUCTING A PUSH STICK