Filter
Top Products
11
ROTATABLE GEAR HOUSING ADJUSTMENT
DISCONNECT TOOL FROM POWER SOURCE.
1. The variable angle reciprocating saw is designed with a rotatable gear
housing for easy adjustment of cutting angle. This feature permits access to
places where conventional tools cannot be used.
2. The gear housing can rotate 90° up or 90° down. The angle can be
adjusted to 13 detented positions (6 up, 6 down, 1 straight).This feature is
designed to simplify adjusting up or down angle of cut and provide
accessibility in close quarters.
3. To rotate the gear housing, depress lock button (A) Fig. 6. Hold the
button depressed while moving the gear housing up or down to the desired
position or angle. Then release the lock button and continue to move the
gear housing until the lock button snaps into the desired detent position (B)
Fig. 7.
FRONT SCROLL HOUSING ADJUSTMENT
DISCONNECT TOOL FROM POWER SOURCE.
1. The variable angle reciprocating saw is designed with a rotatable front
scroll housing for easier radius cuts. This feature permits additional access
in close workspaces to reach places where conventional tools cannot be
used.
2. The front scroll housing can rotate 360°. The front scroll housing can
be adjusted radially to 12 detented positions. This feature is designed to
simplify adjusting to radial angle of cut and combined with the rotatable gear
housing, provides accessibility to most any cutting operation.
3. To rotate the front scroll housing, depress lock button (A) Fig. 8. Hold the
button depressed while moving the front scroll housing clockwise or
counterclockwise to the desired radial position or angle. Then release the
lock button and continue to move the front scroll housing until the lock
button snaps into the desired detent position (B) Fig. 9.
A
Fig. 6
Fig. 7
B
A
Fig. 8 Fig. 9
B