Filter
Top Products
4
SPECIFIC SAFETY RULES AND SYMBOLS
1. Hold tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring. Contact with a “live” wire
will also make exposed metal parts of the tool “live” and shock the operator.
2. There are certain applications for which this tool was designed.
Porter-Cable strongly recommends that this tool NOT be modified and/or
used for any application other than for which it was designed. If you have any
questions relative to its application DO NOT use the tool until you have written
Porter-Cable and we have advised you.
Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
Jackson, TN 38305
3. Be aware that this tool is always in an operating condition, because it
does not have to be plugged into an electrical outlet. Always set the trigger
siwtch to the locked OFF position when installing or removing the battery pack
or drill bits.
4. Do not use bits larger than those recommended (see Maximum
Capacities Chart). Large bits may overload the drill and damage the motor and
gears.
5. Do not use if chuck jaws or other parts are cracked or worn.
6. Verify the drill’s rotation before starting the drill so it is correct for the
operation being performed.
7. Never change direction of rotation until motor has completely stopped.
8. Never hold work in your hand, lap, or against other parts of your body
when drilling.
9. Do not use drill as a router or try to elongate or enlarge holes by twisting
the drill. Drill bits may break and cause injury.
10. Keep hands away from rotating parts.
11. Keep drill bit clear of yourself and all objects while installing and
removing bits (see INSTALLING AND REMOVING BITS).
12. Some wood contains preservatives which can be toxic. Take extra care
to prevent inhalation and skin contact when working with these materials.
Request, and follow, all safety information available from your material supplier.
SYMBOL DEFINITION
V .......................... volts
.......................... direct current
n
o
.......................... no load speed
…/min .......................... revolutions or reciprocation per minute
SAFETY INSTRUCTIONS FOR CHARGER AND BATTERIES
1. Save these instructions. This manual contains important safety and
operating instructions for tool batteries and battery chargers.
2. Before using a battery charger, read all instructions and cautionary
markings on (1) battery charger, (2) battery pack, and (3) product using battery.
3. CAUTION: To reduce risk of injury, Porter-Cable charger Model 8604
should only be used to charge Porter-Cable battery pack Model 8723 and
Porter-Cable charger Model 8624 should only be used to charge Porter-Cable
battery pack Model 8823. Other types of batteries may burst causing personal
injury and damage. Do not charge Porter-Cable Models 8723 and 8823
battery packs with any other chargers.
4. Do not expose charger to rain, snow or frost.
____
– – –
900470 - 11-30-00.QXD 9/25/02 11:09 AM Page 4