Filter
Top Products
8
4. Feed the strip of fasteners into the magazine (“T” slot), until they are past
the spring (A) Fig. 21.
5. Pull the follower (B) Fig. 22 all the way to the rear of the magazine and
release. The follower will apply pressure to the strip of nails to feed it into
the driving mechanism as shown in (B) Fig. 22A .
6. Adjust directional exhaust deflector (A) Fig. 23 so that the exhaust air blast
or debris will be directed away from the operator. The exhaust deflector
provides seven detented positions for directing the exhaust blast away
from the operator. Grasp the deflector and rotate it to the desired
position for the current application.
Fig. 19
A
Fig. 22
B
Fig. 20
Fig. 18
Fig. 21
A
B
A
Fig. 23
A
Fig. 22A
B
C