Filter
Top Products
2
Introduction
Premiere launched the first of its extensive range of floorcare products over 70 years ago.
Its first range of cleaning and maintenance machines came onto the market in 1966 and
are now second to none for efficiency and design. For literature covering the complete
range of both wet and dry vacuums and rotary polishers please ring our head office in
Cheltenham.
Quality Control Procedures
The inspection of component parts and finished machines is governed by detailed performance, quality and
electrical safety specifications. Test results are recorded and all quality assurance systems and records are
approved and inspected by The British Standard Institution in accordance with:-
BS EN ISO 9002 : 1994
Approvals
Details of certifications applicable to individual models are given in the Sales Brochure which is available
upon request.
British Standards Institution
B.S. 5415
Parts 1 and 2
230 volt models
R.W. TÜV e.V.
tested to V.D.E. 0700
Part 1/2.81 and
part 205/2.87
Certificate No. FM 1933
QAS 34/228
Machine Care
The manufacture of safe and dependable machinery is not simply a question of checking procedures at the
end of the production line. It is reliant upon in-built quality at design stage and rigid control on the specifica-
tion of every component part.
As owner/operator of a Premiere machine, continued reliability and performance now depends upon the
care taken in keeping your machine well maintained.
• The plug of the supply cord shall be removed from the socket-outlet before cleaning the appliance or
undertaking maintenance operations.
• The power cord has to be regularly inspected for signs of damage. If the power supply cord is damaged, it
has to be replaced.
• After use, the whole machine, including the cable, should be cleaned with a DAMP cloth using a dilute
solution of Premiere M.P.9. Multi-purpose cleaner. All surfaces should then be polished with a clean duster
untiI dry.
• DO NOT use acid descalers, abrasives or powerful solvents such as paint strippers, which may scratch,
etch or dull surfaces.
• Pads and brushes should be washed immediately after use in a solution of M.P.9 Multi-purpose cleaner
and hot water.
• Rinse thoroughly and allow to drip dry at normal room temperature. Accessories clogged with spirit based
solvent wax should be scrubbed clean using Premturps or Premiere W.S. 70 wax stripper in accordance
with instructions given on the product label.