Filter
Top Products
4
1
2
Fitting/Removing Accessories
For all HV Models
1 Tilt machine backwards so that handle rests on floor and base of
machine is exposed - DIAGRAM 1.
2 Offer up accessory so that triangular form aligns with that of
mating drive.
3 Rotate accessory anti clockwise to secure - DIAGRAM 2.
4 Place machine in upright position.
5 Rotate accessories clockwise to remove from machine.
WARNING
These appliances have been designed for use with accessories
supplied by Premiere.
The fitting of alternative accessories may affect both safety and
performance.
To fit Anti-splash Ring - DIAGRAMS 3 and 4.
1 Tilt machine backwards so that handle rests on floor and base of
machine is exposed.
2 Offer up anti-splash ring ensuring that cut-out portion (A) with its
adjacent retaining brackets (B) is positioned at base of machine.
3 Slide ring upwards until retaining brackets (B) locate over brush
guard at base of machine.
4 Pull top of ring forward and locate retaining bracket (C) over
brush guard at top of machine.
5 Fit accessory in normal manner.
6 Place machine in upright position.
7 Before operating machine ensure that retaining brackets (B) and
(C) are located over brush guard.
8 To remove ring reverse fitting procedure.
3
4
C
B
A
C
B
A