Filter
Top Products
3
9. DISCONNECT TOOL FROM AIR
SUPPLY HOSE before doing tool
maintenance, clearing a jammed fastener,
leaving work area, moving tool to another
location, handing the tool to another
person, or making adjustments. Fig. 5.
10. NEVER USE A TOOL that is leaking
air, has missing or damaged parts, or
requires repair. Make sure all screws and
caps are securely tightened.
11. NEVER USE TOOL IF TRIGGER
mechanism is inoperable, missing or
damaged. Do not alter or remove trigger
mechanism. Make daily inspections for free
movement of trigger mechanism.
12. DO NOT USE TOOL WITHOUT
SAFETY WARNING LABEL. If label is
missing, damaged or unreadable, contact
your Porter-Cable Service Center for a
replacement. Fig. 6.
13. ONLY USE PARTS, FASTENERS,
AND ACCESSORIES recommended by
Porter-Cable.
14. REMOVE ALL FASTENERS from tool
before connecting to air supply. The tool’s
driving mechanism may cycle when tool is
connected to the air supply. Fig. 7.
15. ALWAYS ASSUME THE TOOL
CONTAINS FASTENERS. Keep the tool
pointed away from yourself and others at all
times. No horseplay. Respect the tool as a
working implement. Fig. 8.
16. DO NOT LOAD FASTENERS with
trigger depressed, to prevent unintentional
firing of a fastener. Fig. 9.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
1
2
899223 - 05-31-01.qxd 2/19/02 2:01 PM Page 3