Filter
Top Products
4
Installation Instructions
This quick start guide provides procedures for installing and configuring your new QLogic iSR6152 Router.
■ Step 1. Verify the package contents.
■ Step 2. Complete the pre-installation checklist.
■ Step 3. Mount the router.
■ Step 4. Install the small form-factor pluggable (SFP) transceivers.
■ Step 5. Apply power to the iSR6152 Router.
■ Step 6. Download and Install SANsurfer Router Manager.
■ Step 7. Configure the iSR6152 management port IP address.
Step 1. Verify the Package Contents
The QLogic iSR6152 Router is shipped with the following items:
■ iSR6152 Router (1)
■ SFP transceivers (2)
■ Serial adapter (1)
■ AC power cord (1)
Optional equipment:
■ Shelf for rack mount
Step 2. Complete the Pre-installation Checklist
During the initial configuration process, the system prompts you to enter information for the router. Use the spaces
provided in Table 1 to record the IP addresses, subnet masks, and gateway addresses for all ports.
Table 1. Worksheet for Router
Symbolic Name of iSR6152
Management Port (MGMT)
IP Address (if not using DHCP):
Subnet Mask (if not using DHCP):
Gateway (if not using DHCP):
Gigabit Ethernet (GbE)
Port 1 (GE1)
IP Address:
Subnet Mask:
Gateway:
GbE Port 2 (GE2)
IP Address:
Subnet Mask:
Gateway: