Filter
Top Products
7
Scanner Setup
Battery Notes
• Use fresh alkaline AA batteries.
• Rechargeable batteries can be used, but battery life is shorter than
with alkaline batteries. The scanner will not recharge batteries in the
compartment.
• Always remove old or weak batteries. Batteries can leak chemicals that
destroy electronic circuits.
• Do not mix old and new batteries, different types of batteries
(standard, alkaline, or rechargeable), or rechargeable batteries of
different capacities.
• The batteries are intended to provide backup power for the clock and
for scanning for a short time. When the backup batteries becomes too
low,
appears. Promptly replace the batteries.
• When you either install batteries or connect the AC Adapter to a
standard wall outlet, the scanner powers on and goes to STANDBY
mode. The display shows the initial clock time of 12:00 AM. The
scanner remains in STANDBY mode.
Recycle Rechargeable Batteries
Placing rechargeable batteries in the trash can be harmful to
the environment. Instead, recycle old rechargeable batteries
at your local RadioShack store free of charge. RadioShack
participates in the RBRC
©
battery recycling program, and is
committed to preserving the environment and conserving natural
resources. Call 1-800-THE-SHACK (1-800-843-7422) for moreCall 1-800-THE-SHACK (1-800-843-7422) for more
information.
Scanner Placement
• Do not use the scanner in high-moisture environments such as the
kitchen or bathroom.
• Avoid placing the scanner in direct sunlight or near heating elements
or vents.
• If your scanner receives interference or electrical noise, move the
scanner or its antenna away from the source. You might also try
changing the height or angle of the antenna.