Filter
Top Products
US-13
SGCZ2450S
U
S
8. Operation
OP7
OP8
OP9
OP10
OP11
OP12
OP13
OP14
■ HOW TO USE
• Adjust the front handle to the most
comfortable position.
• Start the engine and pull the throttle
lever gradually. The blades will start
moving as the engine speed goes up.
• To stop the blade motion, simply
release the throttle lever. The clutch will
disengage and the blades stop moving
while the engine keeps idling.
• Move the cutting head as sliding its
bottom on the ground. This will help
you do the job with less effort.
a) Avoid running the engine at full throttle
with no load. Continuous no load full
throttle operation can cause damage to
the engine and the driveshaft.
b) Operation at too slow engine speed
can cause abnormal vibration of the
machine, resulting in short life of
driveshaft and clutch parts. If you felt
such vibration, use a higher speed
range.
c) Though the blades are made of steel
harder than conventional metal blades,
continuous cutting in soil will accelerate
wear.
NOTE
■ CUTTING WORK
This machine does cutting not by a rotary
cutter like conventional trimmers but by a
pair of special blades that moves round
within a limited angle at a speed of
approximately 1/30 of conventional
trimmers. This unique mechanism has
brought you many benefits as following;
1. Since the blade does not cause grass
chips and pebbles to be thrown around,
you may use less care about your
clothing or surrundings.
2. Should the blade hit a rogid object like
stones, trees or steel poles during
operation, it does not produce a
bounce motion that can cause loss of
machine control.
3. Since the blade does not cause cut
grass to wrap around the neck, you
need not to stop operation to remove
such wrappers.
4. What's more, since the whole circle of
the blade is available for cutting, you
can move the cutting head in all
directions and cut grass growing on
such place difficult-to-get by
conventional trimmers. You can even
trim the waterside without splashing
water.
For your health and to prevent the risk
from vibration, refrain from working for
a long time at the cold temperature.
RECOMMENDED APPLICATIONS:
• Parking area (OP8)
• Roadside (OP9)
• Road edge (OP10)
• Near fences (OP11)
• Around stones (OP12)
• Among trees (OP13)
•Waterside (OP14)
WARNING