Filter
Top Products
9
FEATURES
KNOW YOUR ROUTER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
CENTERING TOOL
The centering tool aligns the subbase with the center of the
collet when reattaching the subbase to the router.
CHIP SHIELD
A clear plastic chip shield is installed on the front of the router
for protection against flying dust and chips. The shield is
designed to fit the opening of the router base.
LED WORKLIGHTS
The LED worklights, located on the bottom of the router
motor, illuminate when the slide switch is on. This provides
extra light for increased visibility.
LIGHTED PLUG
The lighted plug with tool icon helps to easily identify live
tools.
PLUNGE DEPTH ADJUSTMENT KNOB
The plunge depth adjustment knob, located on the base of
the plunge base, provides precise stops for repetitive depth
of cut changes. A depth adjustment scale makes quick ad-
justments to depth of cut changes possible.
SLIDE SWITCH
The slide switch is located on top of the motor housing.
It features a soft start to prolong motor life and gives the
operator more control when starting the router.
SPINDLE LOCK
The spindle lock keeps the collet from turning while
installing and removing bits.
VACUUM ADAPTORS
The vacuum adaptors attach to the router base for dust free
routing when used in combination with a vacuum.
VARIABLE SPEED DIAL
The variable speed dial enables speed adjustment of the bit
from 10,000/min to 23,000/min.
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
Router Motor
Fixed Base
Plunge Base
Router Table Attachment Screws (3)
1/2 in. Collet
1/4 in. Collet
1-1/4 in. Vacuum Adaptors (2)
Vacuum Adaptor Screws (2)
Centering Tool
Collet Wrenches (2)
T-Handle Wrench
Operator's Manual
ASSEMBLY