Filter
Top Products
10
FEATURES
KNOW YOUR CIRCULAR SAW
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
DUST CHUTE
To direct saw dust and chips away from the operator, a dust
chute is located on the side of the upper blade guard.
ERGONOMIC DESIGN
The design provides comfort when operating in different
positions and at different angles.
FULL LENGTH KERF INDICATOR
Indicates blade position for more accurate cutting.
ILLUMINATED PLUG
This saw is equipped with a plug that illuminates when
power is supplied to the tool. This allows the operator to
easily identify live tools.
BLADE WRENCH STORAGE
Blade wrench storage is located on saw housing below the
cord exit. The storage area can be accessed by adjusting
the saw to a bevel position.
POWER CORD
The 12-foot cord has a built-in cord wrap.
SPINDLE LOCK
The spindle lock allows you to secure the blade when turning
the blade screw.
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
7-1/4 in. Circular Saw
Blade
6 mm Blade Wrench
Operator’s Manual
WARNING:
If any parts are damaged or missing, do not
operate this product until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
ASSEMBLY
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
WARNING:
7-1/4 in. blade is the maximum blade capacity of
the saw. Also, never use a blade that is too thick
to allow outer blade washer to engage with the
flat on the spindle. Larger blades will come in
contact with the blade guides, while thicker blades
will prevent blade screw from securing blade on
spindle. Either of these situations could result in a
serious accident.
CAUTION:
To prevent damage to the spindle or spindle lock,
always allow motor to come to a complete stop
before engaging spindle lock.